Revvo Caster Wheels
NY Series White Nylon Wheels
- Load capacities from 176 to 3,300 lbs.
- Diameters of 2", 3," 4", 5", 6" & 8"
- Plain, roller and precision ball bearings
- Temperature range -4°F to 146°F
- Durometer 80° to 85° Shore D
- Pre-treated for maximum toughness and durability
- Minimum lubrication required
- Crowned tread for ease of movement
- Virtually non-marking - cause little floor damage
- Resistant to oils, fats, alkalis, soaps and detergents
- Ideal for steam cleaning and wash-down applications (including food processing)
PL Series Black Polypropylene Wheels
- Load capacities from 400 to 1,000 lbs.
- Diameters of 4", 5", 6" & 8"
- Plain and roller bearings - also available with Delrin® bearings
- Economical alternative to nylon wheels
- Designed for use on good floor surfaces at room temperatures
- Resistant to most chemicals and acids
- Non-marking, non-chipping, and steam-cleanable
RP Series Black Phenolic Resin Wheels
- Load capacities from 375 to 1,400 lbs.
- Diameters of 3", 4", 5", 6" & 8"
- Plain and roller bearings
- Temperature range -50˚F to 260˚F
- Durometer 90˚ Shore D; 02 Rockwell E
- Extremely hard and will support high-static loadings for long periods
- Low rolling resistance, hard-wearing, shock resistant, and easy on floor surfaces
- High resistance to chemical attack
GR Series Green Rubber Wheels
- Load capacities from 400 to 800 lbs.
- Diameters of 4", 5", 6" & 8"
- Roller or precision maintenance-free ball bearings (lubricated for wheel lifetime)
- Thick, abrasion-resistant tire on nylon or aluminum center
- Temperature range -40˚F to 158˚F (INTM: 212˚F)
- Durometer 60˚ ± 3 Shore N; 70˚ ± 3 Shore A
- Ideal for towing speeds up to 8mph
- Repels metal shavings and other floor debris
- Non-marking, quiet running
- Reduces noise
- Higher load capacities than standard rubber wheels
RT Series Black Rubber-on-Cast-Iron Wheels
- Load capacities from 200 to 550 lbs.
- Diameters of 4", 5", 6" & 8"
- Roller bearings
- Rubber mold-on tires with spoked cast-iron centers
- Durometer 70˚ to 80˚ Shore A
- Economical alternative to RU Series wheels for lower load capacities
RU Series Black Rubber-on-Cast-Iron Wheels
- Load capacities from 150 to 1,500 lbs.
- Diameters of 2-1/2", 3", 4", 5", 6", 8", 10" & 12"
- Plain, roller, taper roller, or precision ball bearings
- Rubber tires molded to cast-iron center to provide a tough, durable bond
- Temperature range -58˚F to 167˚F
- Durometer 83˚ to 87˚ Shore A
- Combines high load capacities with silent running and floor-preserving qualities
- Designed to withstand rough service conditions
- Available with anti-static, electrically-conductive, or oil-resistant rubber
PT Series Polyurethane-on-Cast-Iron Wheels
- Load capacities from 175 to 14,740 lbs.
- Diameters of 2", 2-1/2, 3, 4", 5", 6", 8", 10", 12" & 16"
- Plain, roller, taper roller, and precision ball bearings
- "Revvothane" tan polyurethane tires on cast-iron centers
- Temperature range -22˚F to 176˚F
- Durometer 92˚ to 97˚ Shore A
- Features narrow footprint wheels for ergonomic push-pull results
- High tear strength, exceptional abrasion resistance, and up to ten times the service life of rubber-tired wheels operating under similar conditions
- Up to three times the load capacities of comparable rubber wheels, enabling the use of smaller diameter wheels when required
CI Series Cast-Iron Wheels
- Load capacities from 175 to 5,000 lbs.
- Diameters of 3", 4", 5", 6", 8" & 10"
- Plain, roller, and precision ball bearings
- Handles the most extreme temperature ranges (depending on bearing choice) that would destroy plastic or rubber wheels
- Provides strength and shock resistance with long service life and economy for use where rough service conditions prevail
- Crowned tread to provide low tractive resistance; ideal where ease of movement is required Clear resin shellac painted center
CV Series Cast Iron Wheels
- Grooved cast iron - ideal for use on inverted angle iron rail
- Load capacities from 450 to 2,200 lbs.
- Diameters of 3, 4", 5", 6" & 8"
- Roller and precision ball bearings
- Handles the most extreme temperature ranges (depending on bearing choice) that would destroy plastic or rubber wheels
- Provides strength and shock resistance with long service life and economy for use where rough service conditions prevail
- Crowned tread to provide low tractive resistance; ideal where ease of movement is required
- Clear resin shellac painted center
CF Series Cast-Iron Wheels
- Single-flanged cast iron - ideal for use on rails
- Load capacities from 1,670 to 2,200 lbs.
- Diameters of 4"& 6"
- Roller, and precision ball bearings
- Handles the most extreme temperature ranges (depending on bearing choice) that would destroy plastic or rubber wheels
- Provides strength and shock resistance with long service life and economy for use where rough service conditions prevail
- Crowned tread to provide low tractive resistance; ideal where ease of movement is required
- Clear resin shellac painted center
PU Series Polyurethane-on-Cast-Iron Wheels
- Load capacities from 590 to 1,450 lbs.
- Diameters of 4", 5", 6" & 8"
- Roller bearings - available with sealed precision ball bearings
- Red polyurethane tire on silver-painted cast-iron center
- Durometer 90˚ to 95˚ Shore A
- An economical alternative with many of the same benefits as "Revvothane" polyurethane wheels
NY Series White Nylon Rollers
- Pallet truck type rollers sharing the same characteristics as Revvo NY Series nylon wheels
- Load capacity of 900 lbs.
- Diameter of 3-3/8"
- Available with precision ball bearings or without bearings and seals
- Nylon roller on cast-iron center
- Temperature range -4˚F to 176˚F
- Durometer 80˚ to 85˚ Shore D
PT Series Polyurethane Rollers
- Pallet truck type rollers sharing the same characteristics as Revvo PT Series polyurethane wheels
- Load capacity of 1,320 lbs.
- Diameter of 3-3/8"
- Available with precision ball bearings or without bearings and seals
- "Revvothane" tan polyurethane rollers on cast-iron center
- Temperature range -22˚F to 176˚F
- Durometer 92˚ to 97˚ Shore A
